We Don't Jet Blind. We Camera First.
4,000 PSI of water is a weapon. Corporate plumbers use it to intentionally destroy old pipes and sell you a $20,000 yard excavation.
We use it surgically to restore your pipes to their factory condition—and we never pull the trigger without running a camera first.
Mandatory Camera Inspection Before Every Jetting Service.
Snake, Jet, or Repair? Match the Tool to the Symptom.
4,000 PSI is the right tool for some clogs and the wrong tool for others. Find your symptom first — then we'll talk about which machine comes off the truck.
| Symptom | What's actually happening | The right tool |
|---|---|---|
| One slow sink or tub — everything else drains fine | A localized clog: hair, soap scum, a kid's toy. It's in the fixture branch, not the main. | A standard drain cleaning. You don't need 4,000 PSI for a hair clog. |
| Kitchen line clogs again weeks after it was snaked | Grease. The cable pokes a hole, and the sludge slumps right back in behind it. | Hydro jetting. It's the only mechanical fix that removes grease instead of poking it. |
| Every drain in the house backs up at once | Your main sewer line is restricted — roots, scale, or decades of sludge. | Camera inspection first, always. Then jetting calibrated to your pipe's material and age. |
| Backups keep coming back in a yard full of mature oaks | Root systems entering at the pipe joints. A snake trims them; they grow right back. | Jetting cuts the roots flush against the joint and washes the debris into the municipal main. |
| Slow drains all over the house, no full blockage yet | Hardened mineral scale shrinking the pipe's interior diameter year after year. | Jetting strips the scale wall-to-wall and restores the factory diameter. |
| The camera shows paper-thin, rotted cast iron | The pipe wall can't take pressure. This stopped being a clog problem. | We refuse to jet it. You get honest structural repair options instead. |
Pipe Restoration Without the Excavator
If you live in an established neighborhood in Edmond, Oklahoma City, Moore, or Norman, your subterranean plumbing has been quietly accumulating debris for decades.
We aren't talking about a simple hair clog in a bathroom sink. We are talking about fifty years of hardened mineral scale, massive root systems from mature oak trees, and industrial-level sludge choking the main sewer line of your home.
You cannot fix half a century of buildup with a standard plumbing snake. Attempting to drag a steel cable against calcified buildup is like trying to sand a hardwood floor with a wire brush. It scratches the surface, but it doesn't solve the structural restriction.
When your main sewer line is heavily restricted by calcification and deep-rooted blockages, you essentially have two options:
- Dig up your entire yard and replace the pipe.
- Restore the pipe from the inside using high-velocity hydro jetting.
At Ultimate Plumbing, our goal is always to save your yard and your foundation. Hydro jetting allows us to perform commercial-grade pipe restoration without ever bringing an excavator onto your property.
"Gage did an amazing job. Took the time to explain what he was doing and helped diagnose the issue. Made quick work of the stoppage and stayed to ensure that all was working and draining as it should!"
How 4,000 PSI Restores Your Plumbing
Hydro jetting is the heavy artillery of the plumbing industry. It is essentially an industrial pressure washer designed specifically to navigate the subterranean infrastructure of your home or business.
We feed a specialized, high-velocity nozzle directly into your sewer line. The system fires multiple water streams simultaneously:
The Battering Ram
Forward-firing water jets operate at 4,000 PSI to obliterate solid blockages and shear through thick tree roots.
The 360-Degree Scour
Heavy rear-firing jets propel the hose deep into the line while simultaneously power-washing the interior walls of the pipe in a complete 360-degree radius.
It strips away decades of hardened scale. It vaporizes biological sludge. It cuts tree roots flush against the pipe joints, washing the debris safely down into the municipal main.
When we finish a hydro jetting service, your pipe isn't just "unclogged." The interior walls are restored to their original, factory diameter.
The "Blind Jetting" Scam (And How to Spot It)
Because hydro jetting is so incredibly powerful, predatory corporate plumbing companies have weaponized it against homeowners.
You've probably seen the billboards for "$29 drain clearing specials." I'm going to tell you exactly how that scam works so you never fall victim to it.
They send a commissioned salesman to your house disguised as a technician. They know you have an older home, which means you likely have aging cast iron or compromised clay pipes buried under your slab.
They pull out their hydro jetting equipment, feed the hose into your fragile pipe, and immediately crank the pressure to maximum capacity. They do this without looking inside the pipe first. In the industry, this is called "Blind Jetting."
That massive, uncalibrated pressure acts like an explosive underground. It instantly shatters the fragile, degraded walls of your older cast iron pipe. It blows out the hub joints and destroys the structural integrity of the line.
Then, after the damage is intentionally done, the technician conveniently pulls out their high-resolution sewer camera to "show you the problem." They point to the shattered pipe on the monitor and tell you that the blockage caused a catastrophic structural collapse.
Your $29 service call just turned into a high-pressure, fear-based sales pitch for a $15,000 to $25,000 emergency trench excavation. They literally broke your pipe on purpose, and now they expect you to pay them a small fortune to dig up your yard.
The Ultimate Plumbing Standard (Camera-First)
At Ultimate Plumbing, we have a strict, uncompromising rule: We never jet blind.
Before we ever hook up the water supply, we deploy a fiber-optic camera down the line. We inspect every inch of the pipe. We verify the exact material. We look for invisible cracks, bellies, and deteriorated cast iron hubs.
We evaluate the structural integrity of your plumbing because our absolute first job is to protect your property, not destroy it.
If your cast iron is paper-thin, rotted, and cannot withstand the water pressure, we will tell you the hard truth. We will refuse to jet it, and we will walk you through safe, structural repair options. We are perfectly willing to walk away from a highly profitable jetting job if it means saving your foundation from a blowout.
But if your pipe is structurally sound and simply choked by years of heavy scale or root intrusion, we calibrate our jetting pressure specifically for your pipe's material and age. We deploy the correct cutting nozzle. We scour the line wall-to-wall.
And when the job is done, we run the camera down the line a second time. We do this so you can see the pristine, restored pipe with your own eyes on the monitor. No tricks. No guesswork. No bait-and-switch.
"They are my go to Plumbing company they handle Commercial they handle residential from top down there. Top notch very reasonable great to work with ultimate plumbing highly recommend."
Commercial and Residential Pipe Restoration
Hydro jetting isn't just for residential homes. It is a critical maintenance requirement for commercial facilities, restaurants, and apartment complexes across the metro.
Commercial lines are subjected to massive volumes of grease, sanitary waste, and structural buildup that require routine hydro jetting to prevent business-halting backups. Whether you are managing a restaurant in Midtown OKC or maintaining a legacy home in Edmond, we have the commercial-grade equipment required to keep your infrastructure flowing.
Stop risking your biggest investment with predatory companies that jet blind. Call Ultimate Plumbing today. We'll run the camera, give you the honest mechanical truth, and restore your pipes to factory condition.
The Post-Jet Clock: When the Camera Goes Back In
A jetted line isn't a sealed line. Roots regrow and grease reloads, so the honest way to schedule a recheck is to let the pipe set the date — not a sales calendar. Here's the clock we actually run:
Before We Leave
The second camera pass happens the same day, before we pack up. You watch the restored pipe wall on the monitor, and that footage becomes your baseline — the documented condition of your line on day one.
If Roots Were the Problem
Jetting cuts roots flush against the joints, but they grew in through those joints once and they will try again. The exit footage marks every entry point, so your recheck gets scheduled off what the pipe actually showed — how many joints, how heavy the intrusion.
If It's a Commercial Grease Line
A restaurant kitchen reloads its line with grease every shift. Routine jetting is a maintenance item here, not an emergency — and the camera tells us whether your interval is holding or needs to tighten.
If You're Back to Snaking
Same line snaked twice in twelve months? The clog was never the problem — the pipe is. That's a camera-and-jetting conversation, not a third cable.
Your baseline footage exists. The recheck is a comparison, not a guess.
Frequently Asked Questions
No, because we never jet blindly. If your pipe is too degraded, we will refuse to jet it and offer a safe repair alternative.
We always perform a full sewer camera inspection first. If you live in an older Edmond or OKC neighborhood with degraded cast iron or clay pipes, 4,000 PSI of water can blow out the joints. We protect your property first.
Full breakdown → when jetting is safe
Snaking provides temporary relief by punching a small hole through clogs, but roots and grease will close it back up. Hydro jetting costs more upfront but provides a permanent solution by scouring the pipe wall-to-wall.
Hydro jetting uses high-pressure water to remove 100% of the buildup. You pay a little more upfront, but you avoid paying for a plumber to come out four times a year.
Full breakdown → what you're actually paying for
No. Trying to snake a grease clog is like trying to shovel water. The cable pushes through, but the sludge immediately collapses back into the pipe.
For grease, sludge, and heavy scale, hydro jetting is the only mechanical solution.
Full breakdown → the mechanical reason a snake can't
Yes. We regularly service restaurants, daycares, and commercial facilities across the OKC metro.
Commercial lines suffer from severe grease and structural buildup that require routine hydro jetting maintenance to prevent business-halting backups.
From the Field Notes
Why Hydro Jetting Costs More Than Snaking
A cable pokes a hole; a jetter scours the wall. What you’re actually paying for.
Read itOld pipesWill Hydro Jetting Damage My Older Pipes?
Not if we scope the line first. When jetting is safe — and when it isn’t.
Read it